BIONIME Rightest GM300 Bedienungsanleitung PDF herunterladen (Seite 1)

Rightest™ GS300 BLOOD GLUCOSE TEST STRIP INSERT

Intended Use

The Blood Glucose Monitoring System is used by individuals with diabetes.

It is for the checking on glucose levels in capillary whole blood (CB) from the finger, as an aid in

management of diabetes at home and clinical sites.

Rightest™ test Strips are intended for testing outside the body ( diagnostic use ) ( For self-

testing ) only.

The Rightest™ System tests the CB and provides results equivalent to a laboratory instrument.

- The Rightest™ Blood Glucose Test Strip is designed for use with the Rightest™ Blood Glucose

GM300/GM110 Meter.

- The Rightest™ Blood Glucose Monitoring System includes meter, Test Strips, Smart Code Key,

Check Key, control solutions, lancing device and lancets.

Rightest™

in vitro

Smart Code Key Installation (only for GM300 Meter)

1) With the Meter off, follow and direction to put the new

Smart Code Key into the track on code key base.

2) Push down the Smart Code Key until it snaps into the Smart

Code Key base.

① ②

Preparing the Lancing Device

(Please see detailed information in User Manual)

1) Unscrew the head of lancing device.

2) Load a lancet into the lancing device.

3) Twist off the protective cover of lancet and keep it

( You will need it after testing ).

4) Screw back the head of lancing device.

5) Twist the comfort dial of lancing device to select

the lancet depth. Start at 2 or 3.

For tougher skin, dial to a higher number.

6) Pull the plunger of lancing device until the end

and release your hand. Your lancing device is

ready. Then set it aside; you will need it in the

next step.

1) Wash and dry your hands. Take one strip from the vial. Close the vial cap immediately.

2) Insert the strip into the strip port on meter with the indication symbol facing up. Push the strip in

until it snaps and stops. The meter will turn on automatically.

3) Make sure the code number on the meter screen matches the code number on the test strip vial.

4) When you see the flashing blood drop, hold the

lancet device to side of your fingertip and press

the release button.

5) Gently squeeze your fingertip to get a drop of

blood. Our meter only needs a tiny blood sample.

Performing a Test

6) Touch and hold the drop to the edge of sample entry until you hear a " beep " and the view window

is totally filled with blood. If the view window is not totally filled with blood or the test does not start.

Then discard the test strip and repeat the test with a new test strip.

7) You will see the countdown mode on the screen. After 8 seconds, the test result appears. For more

information about your test results, please see your User Manual.

8) To remove the lancet, unscrew the head of lancing device and put the protective cover of lancet on

the table. Stick the lancet into the Protective cover by holding the lancing device it into a puncture-

proof container.

For more information on how to use your meter and understand your test results, see the User

Manual.

Test Result

- Blood glucose test results are shown on the meter as mg/dL or mmol/L, depending on which unit of

measurement you have chosen. Consult your doctor before making any changes to your diabetes

medication program.

- If your blood glucose result is unusually high or low, or if you question your results, repeat the test

with a new test strip. You can also run a quality control test with your Rightest™ Check Key and

Rightest™ Control Solutions to check your meter and strip. If the test result still remains unusually

high or low, contact your doctor immediately.

- If you are experiencing symptoms that are not consistent with your blood glucose test results and

you have followed all the instructions in this manual, contact your doctor immediately.

- The Rightest™ Meter displays results between 10 and 600 mg/dL or 0.6 and 33.3 mmol/L. If your

test result is below 10 mg/dL ( 0.6 mmol/L ), " Lo " will appear on the screen. Please repeat your test

again with another strip. If you still get a " Lo " result, you should immediately contact your doctor.

- If your test result is above 600 mg/dL ( 33.3 mmol/L ), " Hi " will appear on the screen. Please repeat

your test again with another strip. If you still get a " Hi " result, you should immediately contact your

doctor.

Expected values

Time

Fast for 8 hours:

Pre-diabetes

Diabetes

After eating or oral glucose tolerance test (in the 2 hours):

Pre-diabetes

Diabetes

Range (mg/dL)

100 – 125

>126

140 – 199

>200

Limitations

- Grossly lipemic ( fatty ) samples may interfere with some methodologies. To be aware of such

interferences, patients under the supervision of their physician should have baseline glucose values

established by a clinical laboratory method prior to starting home glucose monitoring. These

baseline values should be checked periodically thereafter.

- Meter read capillary blood glucose values may be significantly lower than " true glucose levels " in

the hyperglycemic-hyperosmolar state, with or without ketosis. Critically ill patients should not be

tested by the Rightest™ System, or tested with extreme caution.

- Caution is advised in the interpretation of glucose values below 50 mg/dL or above 250 mg/dL.

Consult a physician as soon as possible if values in this range are obtained.

Range (mmol/L)

5.6 – 6.9

>7.0

7.8 – 11.1

>11.1

1.0 1.4 2.0 3.0 .0µl µl µl µl 4 µl

We suggest you to take 1.4~2.5µl to do the test on

glucose monitoring system. Blood sample size

above 4.0µl is too much which might contaminate

the Smart Code Key.

1 2

1 2 3

4 5 6

1 2 3

5

7

NOTE

Different meter kit might be with different lancing device, please follow the instructions in

respective User Manual to make sure you perform the test correctly.

Sample Size Example

Precautions

- Check the expiration date printed on the package every time you use the strip. Do not use expired

test strips.

- Close the vial cap immediately after taking test strip out from the vial.

- Do not perform quality control test with expired control solution.

- Do not bend or twist the test strip. Damage of test strip may cause wrong result.

- Do not reuse test strips.

- Do not reuse lancets. Discard used lancets properly.

- Wait at least 30 minutes to perform a test if you have moved the meter to an area of different

temperature.

- If you want to purchase a new control solution, please contact your authorized Bionime

representative.

Warning

- Keep the test strips or vial cap away from children. They may cause a choking hazard. If a test strip

or vial cap is swallowed, contact your physician immediately.

4

6 8

GM300 Meter GM110 Meter

Test Procedure

REFER TO THE Rightest™ USER’S MANUAL FOR MORE DETAILED INFORMATION.

1 2

Inhaltsverzeichnis

Seite 1 - Sample Size Example

Rightest™ GS300 BLOOD GLUCOSE TEST STRIP INSERT Intended UseThe Blood Glucose Monitoring System is used by individuals wit

Seite 2 - Fingerstick (mg/dL)

- Healthcare professionals should evaluate their technique and their patients' technique at periodic intervals. To accomplish this, i

Weitere Dokumente für Messen, Testen & Steuern BIONIME Rightest GM300

Um das Dokument anzuzeigen BIONIME Rightest GM300 Bedienerhandbuch

BIONIME Rightest GM300 Bedienerhandbuch (2 Seiten)

Um das Dokument anzuzeigen BIONIME Rightest GM300 Bedienungsanleitung

BIONIME Rightest GM300 Bedienungsanleitung (79 Seiten)

Kommentare zu diesen Handbüchern

ChrisTom 17 Apr 2024 | 22:41:43

Hello, im noob :)