BIONIME GM550 Bedienungsanleitung PDF herunterladen (Seite 13)

2524

Hub

Lancet carrier

Plunger

Release button

Depth adjustable cap

Performing a Blood Test

1. Hold the adjustable cap in one hand and hold the

hub in the other hand. Bend the cap towards the down

side. When a gap appears between the cap and hub, pull

them off in opposite directions.

2. Pull off the depth adjustable cap.

3. Insert a new disposable lancet firmly into lancet carrier.

4. Twist off and set aside the protective cover of the

disposable lancet.

5. Replace the depth adjustable cap.

depth

2 3

4 5

Performing a Blood Test

7. Hold the hub in one hand and pull on the plunger in the other

hand. The device will be cocked. Release the plunger, it will

automatically move back to its original position near the hub.

8. Wash your hands with warm soapy water and dry thoroughly.

9. Take one strip from the vial. Re-cap the vial cap immediately.

10. Insert the strip into the strip port of the meter with the indication

symbol facing up. The meter confirms the insertion of the strip

with a beep (if volume is turned on).

6. Choose a depth of penetration by rotating the top portion of the depth

adjustable cap until the setting depth matches the window. Settings are based

on skin type " " for soft or thin skin; " " for average skin; " " for thick

or calloused skin.

NOTE

The meter will automatically detect Code number on

strip. You don't have to check the Code number on the

meter display and strip vial.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Keine Kommentare

BIONIME GM550 Bedienungsanleitung Seite 13